Product Infos and Data Sheets

AURUM ® TPI Granules

AURUM has outstanding thermal properties. Therefore, it is used typically in precision machinery, industrial machinery parts, electrical and electronic parts, automotive and transport equipment parts, special insulation and as a metal replacement

AURUM ® TPI Powder

extremely high glass transition temperature (Tg) of 245°C. For instance, it is used in high-performance washers, ball-bearing cages, dry bearings, seals and gears, advanced coatings, clean applications, aviation, automotive

DEXNYL ® rPI-s Powder

DEXNYL ® rPI-s Powder has higher wear resistance, lower oil absorption, low thermal conductivity and economical price ranage compared to virgin thermosetting PI-powder. Available in two correl-sizes: 30my and 50my

PLAVIS Sheets

PLAVIS Sheets have high temperature resistance with continuous operating temparature wide over 300°C and a lower coefficient of thermal expansion, wide thermal resistance and maximum electrical insulation, low coefficient of thermal expansion, highest retention of tensile strength with lowest outgassing properties at 300°C temperature.

The Plavis S grades offer a high temperature resistance with continuous operating temparature up to 350°C, even at temperatures over 350°C the tensile strength reduction does not occur for a long period, which also facilitates wear resistance and long lasting properties.

Available at 12" +12" (304.8 x304.8mm) width and length and with minimum thickness of 12.7mm up to maximum thickness of 62mm.

PLAVIS Rods

PLAVIS Rods have high temperature resistance with continuous operating temparature wide over 300°C and a lower coefficient of thermal expansion, wide thermal resistance and maximum electrical insulation, low coefficient of thermal expansion, highest retention of tensile strngth with lowest outgassing properties at 300°C temperature

Available from 1/4" (6.35mm) diameter to 2" (50.80mm) diameter. Length - 19.6" (500mm)

LUVOCOM ® EOG PEEK Compounds

High-Performance LUVOCOM ® EOG PEEK Compounds
Elevating Performance Over Traditional PEEK Materials. Neat, tribological, glass and carbon fiber reinforced grades. Qualified to NORSOK M710.

© CoPEEK Granules

© CoPEEK Granules are produced using modern filtration units and therefore available in four grades: low, normal, high and ultra-high viscosity

DEXNYL ® Black PEEK Masterbatch

DEXNYL ® Black PEEK Masterbatch has high purity, high temperature resistance, resistance to chemicals, is FDA approved and blends uniformly with common PEEK grades

DEXNYL ® R-PEEK

high strength and high temperature molded parts in the injection molding and extrusion process therefore it is used in: aerospace, automotive, electrical / electronics, engineering, marine, medical and chemical industries.